Extruded polystyrene foam is one of the most demanded thermal insulation materials at the moment. It is often called "penoplex" by the people, even if it is not quite correct. The main thing is that it is easy to work with this product, even without installing the frame before laying. How to insulate the walls with this material using the adhesive method?
1. Preparation of walls for thermal insulation work
In order to efficiently glue the foam onto the wall, the latter must first be thoroughly cleaned of previous materials and impurities, and then leveled. The walls are lined with plaster. Before that, it is treated with a primer. It is not necessary to achieve perfect smoothness. The main thing is that in the end there will be no noticeable height differences. After the plaster dries, the primer is applied to the wall again.
2. Gluing foam on the wall
For reliability, it is better to take glue designed for heavy materials. Styrofoam is glued onto the wall in full rows, always observing the rules of ligation of seams. The technology is quite simple. First, the adhesive composition is applied to the work surface itself. A comb roller is passed over it.
Next, the foam plate is pressed against the surface and held for at least a minute. The next slab is placed next to the previous one. The second row does not start with a single panel, but with a half. This is necessary so that the seams in the thermal insulation layer do not intersect.
3. Additional fixing of the foam
In fact, glue alone is often not enough. Therefore, when the entire wall is covered with a heat insulator, and the adhesive composition dries, it is better to additionally grab the interlayer with dowels or screws. For example, the use of mushroom dowels will have a good effect. They are placed in the joints between the plates, after which such a dowel will attach several thermal insulation elements to the surface at once.
4. Preparation of the heat insulator for finishing
Now the thermal insulation layer needs to be covered with plaster. To do this, an adhesive compound is first laid on the foam. It is generously treated with insulation, then a paint grid is pressed into the glue. It also needs to be attached to the dowels or screws that were used to install the foam at the previous stage. Plaster can be applied to such a base. Then it will only have to be painted.
In principle, it is not difficult to work with penoplex. But only with careful approach, the owner will receive decent insulation and an excellent finish. 바카라사이트 신용/직불 카드, 전자 지갑, 은행 송금 및 암호화폐를 포함한 다양한 결제 옵션을 사용하여 쉽게 입금 및 출금할 수 있습니다. 모든 거래는 빠르고 안전하게 처리되며 이메일과 라이브 채팅을 통해 우수한 고객 지원을 제공합니다. 고객 지원팀은 연중무휴 24시간 대기하며 문의 사항이나 우려 사항에 대해 도움을 드립니다. 또한 웹사이트에 일반적인 질문과 문제를 다루는 자세한 FAQ 섹션이 있습니다.